Welcome to Stamplicity Services
Welcome
Welcome to Stamplicity's Service Department!
Whether you are submitting a new tooling design for simulation, optimizing an
existing tool, or requesting rechecks, we’re here to make the process smooth
and efficient.
Data
With a wide variety of CAD platforms, data is often translated to a more universal format to be shared with others. We prefer ALL data is sent to us in STEP format (*.stp).
Additionally the structure and settings used for export can impact how well that data comes through for us. In an effort to minimize clean up time and streamline the process, we have a comprehensive guide / FAQ for data prep that you can review here.
New Tool Simulation
If you have a new tooling design that you want to have
simulated and would like to understand what is included, you can review the New Tooling Deliverables. When
you are ready to get your project quoted, use the New
Project RFQ form to submit it.
Recheck Data
If you’ve received the initial results (R1) for a new or existing tool and have completed the changes, you can submit the updated data using the Recheck Data Form. This is a simplified form with only the essential information required to get your data in and rechecked.
Existing Tool Optimization
If you are looking to have an existing tool optimized,
review our Existing
Tool Optimization Requirements
After you’ve reviewed the requirements, you can use the same New Project RFQ link to upload the data and additional materials. Be sure to indicate that the Tool Type is “Existing”.
Support
We’re here to support you every step of the way. If you need
any assistance or have any questions, reach out at Service@Stamplicity.com or
call (616) 863-8630. We look forward to helping make your tooling the best it
can be!
Related Articles
When does Stamplicity make changes to Automation, Travel Distances or Design?
Why Would Stamplicity’s Service Department Make Changes? While we aim to avoid modifications, our priority is to ensure the highest possible strokes per minute (SPM), confirm that suppliers adhere to customer standards, and verify that the automation ...New Tooling Deliverables and How to Use Them
Stamplicity Service Department - Transfer Die T-SIM Simulation Deliverables for New Tooling General Information we provide back: Corrective Action Reports Also known as CAR's, are the deliverable we create from the results of the simulation. The ...CAD Data FAQ
CAD Data FAQ When do we send the CAD data to Stamplicity's service department? When to send the data depends on what service(s) the Stamplicity service department is providing for you. RFQ Data: T-SIM can quote new tooling simulation using: just a ...Confirmation of Changes
What is a "confirmation of changes document"? A confirmation of changes is just that, a confirmation that each change was in fact completed in the die design. Before Stamplicity's Service department can proceed to the press setup package, we need to ...Press Information Collection
Getting Started Collecting the information needed to create an accurate T-SIM Press Template can be challenging at times. Because of this we've created resources to help you navigate this process. These are included in the Press Information Package ...